SL-700-2 Cement Mortar Spraying Machine
产品详情
Product Description & Advantages
1. Function Description
The multi-functional spraying machine is a continuous working jet pump, suitable for various ready-mixed mortars, putties and real stone paints with aggregate diameter no more than 1mm.The machine is equipped with a frequency conversion control system, which can adjust the spraying working pressure according to your needs, and achieve the expected spraying effect through multi-caliber spray nozzles.It can improve working efficiency by more than 5 workers and reduce labor costs.
2. Scope of Application
The multi-functional spraying machine is suitable for construction on internal walls, external walls, ceilings, floors and the following materials on various construction sites:putty, real stone paint, texture coating, plastering gypsum, plastering mortar, cement slurry, waterproof primer.
3. Product Advantages
The multi-functional spraying machine is a pumping and jetting product with a frequency conversion control system.It can realize spraying of various materials, improve construction efficiency and product quality, reduce construction costs and labor demand.The product is fully functional with the following advantages:
- -Improve construction efficiency and reduce construction cost
- -Adjust the mechanical spraying speed through the frequency conversion control system
- -The pumping system supports long-distance vertical and horizontal delivery
- -Suitable for various coatings such as putty, cement, primer, polyurethane, cured asphalt, etc.
Operation, Cleaning & Maintenance
I. Startup & Operation
1. Fixing & Inspection
(1) Lock the caster brakes before startup.(2) Inspect all parts of the machine before startup to ensure complete and clean components, and no foreign matter in the hopper.
2. Power Connection
Before switching on the power at the distribution box, all switches must be OFF.Connect the main power plug to the main power socket of the drive motor.Ensure the power supply meets the required voltage for normal operation.
3. Wetting the Spray Hose
Wet the spray hose before connection.
4. Spray Gun Connection
Connect the spray hose and air hose to the spray gun.Connect the other end of the spray hose to the screw pump flange shaft, and the other end of the air hose to the air compressor outlet.Turn on the air switch on the spray gun.
5. Feeding & Conveying
Pour the pre-stirred wet material into the hopper.Turn on the air compressor, main power switch and motor switch in sequence.The machine runs and discharges material.Adjust the frequency conversion knob and air outlet flange according to the required working pressure and air output.
II. Machine Cleaning
1. Cleaning the Spray Hose
After use, turn on the main power and motor switch.
- For oil-based coatings: clean with xylene 2–3 times first, then clean with water until no residue remains.
- For water-based coatings: clean directly with water.
2. Cleaning the Hopper
- Clean the inner wall of the hopper with a wire brush.
- Rinse the hopper with water, open the discharge port and drain residual material.
III. Maintenance Measures
- Clean the whole machine and inspect components integrity after daily construction; conduct a full inspection before each use.
- Disassemble and clean the screw pump flange shaft weekly to ensure no material residue.
- If the machine has not been used for a long time, conduct a full inspection before reuse, especially the wear of the drive motor and screw pump.Only use original accessories (rotor, stator, drive shaft, etc.), as they are precisely matched.Using non-original parts will void the warranty and reduce pump performance.
Accessory List
Standard Configuration:1 complete machine, 1 set of spray gun, 1 high-pressure delivery hose (5m), 1 filling needle.
Previous : SL-700-1 Cement Mortar Spraying Machine
Next : SL-710 Cement Mortar Grouting/Spraying Machine
Copy product links
Long by picture save/share
Customer Service 1
Customer Service 2
