SL-1600 High-Permeability Modified Epoxy Resin Grouting Material

Scope of Application

Product Features

1. 1.Solvent-free epoxy resin with high solid content, low heat release after curing, high strength, good toughness, strong adhesion, excellent chemical resistance (acid, alkali, salt, heat), impact resistance and vibration resistance. It is non‑shrinking and provides excellent performance for various structures.
2. 
   
3. 2.Applicable for high-pressure grouting or low-pressure injection; can penetrate extremely fine structural cracks to achieve full repair and reinforcement, restore structural integrity, and maximize building repair and strengthening.
   
4. 
   
5. 3.Appropriate special diluent may be added according to site conditions (addition is optional; dosage depends on desired fluidity).
   

Technical Specifications

• Viscosity (25°C), mPa·s: 200
• Compressive strength, MPa: ≥ 40
• Flexural strength, MPa: ≥ 5.0
• Tensile strength, MPa: ≥ 10
• Bond strength, MPa: ≥ 3.0
• Working time: 30–60 min
• Full curing time: 8–24 h (summer); 24–72 h (winter), depending on temperature

Notes

1. 1.The base component and curing agent must be mixed uniformly at the specified ratio before use.
2. 
   
3. 2.After mixing, the material must be used within its working time to avoid premature curing.
   
4. 
   
5. 3.Tools, mixers and containers after use should be cleaned with xylene or acetone before the material hardens.
   
6. 
   
7. 4.Avoid skin contact during construction; wear protective clothing and gloves if necessary.
   

Packaging

• 1:1 set: 20 kg
• 2:1 set: 15 kg
• 5:1 set: 12 kg

Storage, Maintenance and Transportation